< back
LIQUID BRASS/COPPER BRITE DIP

LIQUID BRASS/COPPER BRITE DIP

LIQUID BRASS/COPPER BRITE DIP is a chrome free product used to produce a uniform, bright tarnish free surface on copper and copper containing alloys, particularly brass and bronze.

Features

It is especially recommended for use on forgings, castings and machined surfaces.

Application

Parts to be processed in LIQUID BRASS/COPPER BRITE DIP should be free of grease and oil. They can be degreased and/or soak cleaned in a product like Haviland’s CLEANER SSP-140. The cleaned parts are then immersed for 30 seconds to 10 minutes at room temperature depending upon desired finish and build up of scale. Be aware that the temperature of this bath will rise during use.

When effectiveness of the solution begins to drop off, remove 1/4 to 1/2 of the bath and replace an equal amount of fresh product to restore its vigor. The solution will eventually reach a level of contamination at which further additions will not restore the bath and replacement will be necessary.

Available Sizes

  • 55 gallon drums
  • Totes